Davison, L., Headley, T., and Pratt, K. 2005. "Aspects of design, structure, performance and operation of reed beds—Eight years experience in north eastern New South Wales, Australia." Water Science and Technology 51: 129-138.
Martel, J.C. 1989. "Development and design of sludge freezing beds." Journal of Environmental Engineering 115: 799-808.
-. 2001. Design of Freezing Bed for Sludge Dewatering at McMurdo, Alaska.
ERDC/CRREL TR-01-3. Hanover, NH: U.S. Army Corps of Engineers, Engineering Research and Development Center.
Metcalf and Eddy, Inc. 1991. Wastewater Engineering, Treatment, Disposal, and Reuse, 3rd edition. New York: McGraw-Hill, Inc.
Neyens, E., Baeyens, J., De heyder, B., and Weemaes, M. 2004. "The potential of advanced treatment methods for sewage sludge." Management of Environmental Quality: An International Journal 15: 9-16.
Neyens, E., Baeyens, J., Weemaes, M., and De heyder, B. 2002. "Advanced biosolids treatment using H2O2-oxidation." Environmental Engineering Science 19: 27-35.
Reed, S., Bouzoun, J., and Medding, W. 1986. "A rational method for sludge dewatering via freezing." Journal of Water Pollution Control Federation 58: 911-916.
Reed, S.C., Crites, R.W., and Middlebrooks, E.J. 1995. Natural Systems for Waste Management and Treatment, 2nd edition. New York: McGraw-Hill, Inc.
USEPA. 1987. Design Manual: Dewatering Municipal Wastewater Sludge. EPA 625/1-87014. Cincinnati, OH: Office of Research and Development, USEPA.
Wang, H., Li, X., and Zhao, C. 2004. "Surface properties of activated sludge and their effects on settleability and dewaterability." Journal of Tsinghua University (Science and Technology): 44:766-769.
Food and Agricultural Waste Water Utilization and Treatment
Sean X. Liu
Copyright © 2007 by Blackwell Publishing
Was this article helpful?