References

Power Efficiency Guide

Ultimate Guide to Power Efficiency

Get Instant Access

al-riyami, b. a., klemes, j. and perry, s. (2001), Heat integration retrofit analysis of a heat exchanger network of a fluid catalytic cracking plant. Applied Thermal Engineering 21, 1449-1487. asante, n. d. k. and zhu, x. x. (1997), An automated and interactive approach for heat exchanger network retrofit. Transactions of the Institution of Chemical Engineers 75, 349-360. awarenet (2004), Handbook for the Prevention and Minimisation of Waste and Valorisation of By-products in European Agro-food Industries, BI-223-04. Fundacion Gaiker, Zamudio, Spain. cpi (Centre for Process Integration) (2004 and 2005), Heat integration and Energy Systems, MSc course, School of Chemical Engineering and Environmental Science, University of Manchester, UK. cpi (Centre for Process Integration) (2004 and 2005) Low temperature gas processing, CPD (Continuing Professional Development) Course, School of Chemical Engineering and Analytical Science, University of Manchester. de las fuentes, l., sanders, b. and Klemes, j. (2002), AWARENET (Agro-food Wastes Minimisation and Reduction Network), 7th European Conference Biosolids and Organic Residuals - CIWEM Conference, Wakefield UK, 20th November 2002.

de las fuentes, l., sanders, b. and klemes, j. (2002), AWARENET (Agro-food Wastes Minimisation and Reduction Network), Proceedings of 5th Conference on Process Integration, Modelling, and Optimisation for Energy Saving and Pollution Reduction - PRES 2002 (CHISA 2002), Prague, September 2002, Lecture H4.4, (1328).

detr (Department of the Environment, Transport and the Regions) (1997) Van den Bergh Oils Ltd, Purfleet: The use of pinch analysis in a food processing factory. Good Practice Case Study 355. detr (Department of the Environment, Transport and the Regions) (1996) David Reay & Associates and Osprey Environmental Technologies Ltd, Waste Heat Recovery in the Process Industry. dhole, v. r. and linnhoff, b. (1993), Total site targets for fuel, co-generation, emissions, and cooling. Computers and Chemical Engineering 17, Suppl. S101-S109.

donnelly, n., klemes, j. and perry, s. (2005), Impact of economic criteria and cost uncertainty on heat exchanger network design and retrofit, Proceedings of 8th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction - PRES'05, Ed. J Klemes, May 2005, Giardini Naxos, Italy, pp.127-132.

DTI (Department of Trade and Industry) (2005) UK Energy in Brief, DTI/Pub

7924/4.5k/07/05/NP. URN 05/220 (www.dti.gov.uk). Institute for Prospective Technological Studies (2006a) European Commission, Directorate-General Joint Research Centre - Integrated Pollution Prevention and Control Reference Document on Best Available Techniques in the Food, Drink and Milk Industries (http://eippcb.jrc.es/pages/FActivities.htm; visited 15 March 2006).

Institute for Prospective Technological Studies (2006b) European Commission, Directorate-General Joint Research Centre - Integrated Pollution Prevention and Control, Reference Document on Best Available Techniques in the Slaughterhouses and Animal By-products Industries (http://eippcb.jrc.es/pages/FActivities.htm; visited 15 March 2006). EIA (Energy Information Administration) (2005) www.eia.doe.gov/oiaf/1605/

95report/glossary.html; accessed 25 July 2005. grabowski, m., klemes, j., urbaniec, k., vaccari, g. and zhu, x. x. (2001), Minimum energy consumption in sugar production by cooling crystallisation of concentrated raw juice. Applied Thermal Engineering 21, 1319-1329. grabowski, m., klemes, j., urbaniec, k., vaccari, g. and wernik, j. (2002a), Characteristics of energy and water use in a novel sugar manufacturing process. AIDIC Conference Series 5, 113-116. grabowski, m., klemes, j., urbaniec, k., vaccari, g. and wernik, j. (2002b), Energy and water use in a sugar manufacturing process based on cooling crystallization of concentrated raw juice (Energie- und Wasserbedarf bei der Zuckererzeugung mittels Kuhlungskristallisation von eingedidicktem Rohsaft). Zukerindisurie 127 (8), 604-609. hufendiek, k. and klemes, j. (1997), Integration of a brewery by pinch analysis.

Gospodarka Paliwami i Energia 45 (9), 22-25 (in Polish). klemes, j. and stehlik, p. (2003), Recent novel heat integration developments: improved operation, multi-period utilities systems, batch process scheduling, pressure consideration, retrofit, cost factors, energy price forecast and industrial case studies. Applied Thermal Engineering 23, 1723-1728. klemes, j. and friedler, f. (2005), Recent novel developments in heat integration - total site, trigeneration, utility systems and cost-effective decarbonisation. Case studies in waste thermal processing, pulp and paper and fuel cells. Applied Thermal Engineering 25 (7), 953-960. klemes, j., dhole, v. r., raissi, k., perry, s. j. and puigjaner, l. (1997), Targeting and design methodology for reduction of fuel, power and CO2 on total sites. Applied Thermal Engineering 17 (8-10), 993-1003. klemes, j., kimenov, g. and nenov, n. (1998), Application of pinch-technology in food industry, Proceedings of the 1st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution reduction - PRES'98, Prague, August 1998, lecture F6.6. klemes, j., nenov, n., kimenov, p. and mintchev, m. (1999a), Heat integration in the food industry. Integrirovannye Tehnologii I Energosberegenie (Integrated Technologies and Energy Saving) 4, 9-26 (in Russian). klemes, j., urbaniec, k., vaccari, g., mantovani, g., bubnik, z., lentini, a., kadlec, p. and placek, i. (1999b), Project SUCLEAN - research on minimisation of energy and water use in sugar production by cooling crystallisation of concentrated raw juice, 21st General Assembly of 'Commission Internationale Technique de Sucrerie', Antwerp, May 1999. klemes, j., urbaniec, k. and zalewski, p. (1999c), Retrofit design for polish sugar factories using process integration methods, Proceedings of 2nd Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction - PRES'99, Eds F Friedler and J Klemes, Budapest, June 1999, pp. 377-382.

klemes, j., bulatov, i. and cockerill, t. (2005a), Techno-economic modelling and cost functions of CO2 capture processes, MS-142, Proceedings of European Symposium on Computer Aided Process Engineering - 15 (ESCAPE 15), Ed. L Puigjaner and A Espuna, Barcelona, Spain, 29 May-1 June 2005, pp. 295-300. klemes, j., bulatov, i., jansen, p. and koppejan, j. (2005b), Novel energy saving technologies assessment by EMINENT evaluation tool, No. 147, Proceedings of 8th Conference on Process Integration, Modelling, and Optimisation for Energy Saving and Pollution Reduction - PRES'05, Ed. J. Klemes, Giardini Naxos, Italy, May 2005, pp. 163-168. koroneos, c., roumbas, g., gabari, z., papagiannidou, e. and moussiopoulos, n. (2005), Life cycle assessment of beer production in Greece. Journal of Cleaner Production 13 (4), 433-439. linnhoff, b. and hindmarsh, e. (1983), The pinch design method of heat exchanger networks. Chemical Engineering Science 38 (5), 745-763. linnhoff, b. and vredeveld, d. r. (1984), Pinch technology has come of age.

Chemical Engineering Progress 80 (7), 33-40. linnhoff, b., townsend, d. w., boland, d., hewitt, g. f., thomas, b. e. a., guy, a. r. and marsland, r. h. (1982 and 1994), User Guide on Process Integration for the Efficient Use of Energy, IChemE, Rugby. Linnhoff March: http://www.linnhoffmarch.com/clients/food.html, accessed 5 August 2005.

lundie, s. and peters, g. m. (2005), Life cycle assessment of food waste management options. Journal of Cleaner Production 13 (3), 275-286. raghu ram, j. and banerjee, r. (2003), Energy and cogeneration targeting for a sugar factory. Applied Thermal Engineering 23 (12), 1567-1575. shenoy, u. v. (1995), Heat Exchanger Network Synthesis, Process Optimisation by

Energy and Resource Analysis, Gulf Publishing Company, Houston, Texas. smith, r. (2005), Chemical Process Design and Integration, John Wiley & Sons, Ltd,

Chichester, England. smith, r. and linnhoff, b. (1988), The design of separators in the context of overall processes. Chemical and Engineering Research and Design 66, 195-228. sprint (2006), Process Integration Software, Centre for Process Integration, CEAS,

The University of Manchester, UK. star (2006), Process Integration Software, Centre for Process Integration, CEAS,

The University of Manchester, UK. taal, m., bulatov, i., klemes, j. and stehlik, p. (2003), Cost estimation and energy price forecast for economic evaluation of retrofit projects. Applied Thermal Engineering 23, 1819-1835. trei, a. (Texas Renewable Energy Industries Association (2005) www.treia.org/

redefinition.htm; accessed 15 July 2005. urbaniec, k., zalewski, p. and klemes, j. (2000), Application of process integration methods to retrofit design for Polish sugar factories. Sugar Industry 125 (5), 244-247.

vaccari, g., tamburini, e., sgualdino, g., urbaniec, k. and klemes, j. (2002), Overview of the environmental problems in beet sugar processing: possible solutions, Proceedings of 5th Conference on Process Integration, Modelling, and Optimisation for Energy Saving and Pollution Reduction PRES 2002, Prague, September 2002, Lecture H4.3 (543). vaccari, g., tamburini, e., sgualdino, g., urbaniec k and klemes j (2004), Overview of the environmental problems in beet sugar processing: possible solutions. Journal of Cleaner Production 13, 499-507. varbanov, p., perry, s., klemes, j. and smith, r. (2005), Synthesis of industrial utility systems: cost-effective decarbonisation. Applied Thermal Engineering 25, 985-1001.

Was this article helpful?

0 0
Going Green For More Cash

Going Green For More Cash

Stop Wasting Resources And Money And Finnally Learn Easy Ideas For Recycling Even If You’ve Tried Everything Before! I Easily Found Easy Solutions For  Recycling Instead Of Buying New And Started Enjoying Savings As Well As Helping The Earth And I'll Show You How YOU Can, Too! Are you sick to death of living with the fact that you feel like you are wasting resources and money?

Get My Free Ebook


Post a comment