Sludge Conditioning By Thermal Methods

There are two basic processes for thermal treatment of sludge. One, wet air oxidation, is the flameless oxidation of sludge at temperatures of 450 to 550° F and pressures of about 1,200 psig. The other type, heat treatment, is similar but carried out at temperatures of 350 to 400° F and pressures of 150 to 300 psig. Wet air oxidation (WAO) reduces the sludge to an ash and heat treatment improves the dewaterability of the sludge. The lower temperature and pressure heat treatment is more widely used than the oxidation process.

When the organic sludge is heated, heat causes water to escape from the sludge. Thermal treatment systems release water that is bound within the cell structure of the sludge and thereby improves the dewatering and thickening characteristics of the sludge. The oxidation process further reduces the sludge to ash by wet incineration (oxidation). Sludge is ground to a controlled particle size and pumped to a pressure of about 300 psi. Compressed air is added to the sludge (wet air oxidation only), the mixture is brought to a temperature of about 350° F by heat exchange with treated sludge and direct steam injection, and then is processed (cooked) in the reactor at the desired temperature and pressure. The hot treated sludge is cooled by heat exchange with the incoming sludge. The treated sludge is settled from the supernatant before the dewatering step. Gases released at the separation step are passed through a catalytic after-burner at 650 to 705° F or deodorized by other means. In some cases these gases have been returned through the diffused air system in the aeration basins for deodorization. An advantage of thermal treatment is that a more readily dewaterable sludge is produced than with chemical conditioning. Dewatered sludge solids of 30 to 40 percent (as opposed to 15 to 20 percent with chemical conditioning) have been achieved with heat treated sludge at relatively high loading rates on the dewatering equipment (2 to 3 times the rates with chemical conditioning). The process also provides effective disinfection of the sludge. Unfortunately, the heat treatment process ruptures the cell walls of biological organisms, releasing not only the water but some bound organic material. This returns to solution some organic material previously converted to particulate form and creates other fine particulate matter. The breakdown of the biological cells as a result of heat treatment converts these previously particulate cells back to water and fine solids. This aids the dewatering process, but creates a separate problem of treating this highly polluted liquid from the cells. Treatment of this water or liquor requires careful consideration in design of the plant because the organic content of the liquor can be extremely high.

Because the WAO process also aims to reduce sludge volume we will spend more time describing this process under the section dealing with Volume Reduction. The other thermal sludge conditioning method is best-known as sludge pasteurization, and deserves more than just a brief overview.

Was this article helpful?

0 0
Trash Cash Machine

Trash Cash Machine

How recyclable trash can save the world and bank us huge profits! Get All The Support And Guidance You Need To Be A Success At Recycling! This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Make Profits With Trash!

Get My Free Ebook

Post a comment